Sold Out New

Float Arm and Float Ball – Stainless Polar Bear Water Distiller Model 26 Series

$95.95

Float Arm and Float Ball – Stainless Polar Bear Water Distiller Model 26 Series. Item #400028 Universal Part fits Polar Bear Water Distillers, Models: 26E, 26E1, 26M, 26-14, 26C, 26CT, 26C8, 26D, 26D4, 26D8

Float Arm and Float Ball – Stainless Polar Bear Water Distiller Model 26 Series  

Item #400028

Universal Part fits Polar Bear Water Distillers, Models: 26E, 26E1, 26M, 26-14, 26C, 26CT, 26C8, 26D, 26D4, 26D8

Order parts Seperatly, not sold as a kit.

Does not include seals- order  #100067 Boiler Tank Float Gasket, No Tear (Black) & 1 #100066 Boiler Tank Float Gasket, Silicone

Please read complete instructions before replacing components.

Tools Required

  • Red Robertson Screwdriver
  • #2 Phillips Screwdriver
  • Adjustable (Crescent) Wrench
  • Needle Nose Pliers
  • 7/16” Nut driver or socket

Assembly Instructions

  1. Turn main power switch on distiller off and unplug cord from wall plug.
  2. Drain the boiler tank. CAUTION: DRAIN VALVE MAY BE VERY HOT. Wait at least 1 hour for the boiling tank to cool.
  3. Using the Robertson screwdriver, remove distiller covers. On a 26-CT, 26D8, 26C-8 or 26-14, this will require disconnecting the feed line and removing the brass feed line fitting at the back of the distiller. ENSURE SADDLE VALVE IS CLOSED BEFORE DISCONNECTING FEED LINE.
  4. Remove boiling tank lid. Grip the float rod with the needle nose pliers at the location indicated by the arrow. Unscrew the float ball and remove. Also remove the locktooth washer.
  5. Follow the instructions given in the float gasket replacement to remove old float gaskets, but do not install the new ones. Carefully remove float rod.
  6. Screw locktooth washer and float ball on to the new float rod. DO NOT BEND THE FLOAT ROD.
  7. Place new float rod into boiler tank. Install by first fitting float rod arm into the float bracket inside the boiling tank.
  8. Install the new float gaskets according to the instructions given in with the float gaskets.

 

 

The distiller should now operate properly. If it does not,  we suggest you take your distiller to an authorized service representative, or phone 1-780-477-1328 for assistance.

 


Distiller Parts | Health Food Stores Edmonton | Natural Food Stores Edmonton | Supplement Stores Edmonton | Health Supplement Stores Edmonton | Best Supplement Stores Edmonton | Aromatherapy Stores Edmonton | Vitamin Stores Edmonton | Herbal Stores Edmonton | Natural Body Care Edmonton | Cooler Stores Edmonton | Distiller Stores Edmonton | Reverse Osmosis Water Filters Edmonton | Water Pumps Edmonton | Water Pumps for Sale Edmonton

 

 

 

 

Reviews

There are no reviews yet.

Be the first to review “Float Arm and Float Ball – Stainless Polar Bear Water Distiller Model 26 Series”