This Reverse Osmosis Booster Pump Kit will typically increase the production rate of an RO system by 20 to 40% and will also keep the production to waste ratio at an even level. Also ideal for improving the flow rate at your tap and the best solution for High TDS levels and basement or remote installation areas. This is a complete kit with no additional materials required for a typical installation. All you’ll need are a few simple hand tools to complete the job.

What’s in the box?

• Pump – pre-wired & pre-plumbed – (Pump Part # PUMPPAC-110T)
• In & Out push style 1/4″ fittings (or 3/8″ FNPTF Port)
• Pressure Switch – pre-wired
• AC Adapter – pre-wired
• Mounting Hardware
• Flow Control – Capillary type
• Complete Installation Instructions with diagrams and specification sheet.

Specifications:

• Part #: EXPKIT or RO-COM-001
• Type: Diaphragm-type booster pump
• Voltage: 24 VDC AMPS: 0.22
• AC Adapter: 120v Standard North American Plug Type
• FLUID: Municipal or well water
• FEED PRESSURE: 100 PSI maximum
• MAXIMUM TEMP: 120 C OPEN FLOW: 1.24 l/min.
• COLOUR: Bright metal body, black pump head
• MATERIAL: Pump head/diaphragm: FDA approved resin Pump bracket: die-cast nickel alloy
• Made by Waterite Technologies