Sold Out New

Filter Lid SS for Polar Bear Distiller


Filter Lid Stainless Steel for Polar Bear Distillers – Used with Models Model 26E1, 26M, 26E2, 26D, 42D with optional storage tank

Filter Lid SS for Polar Bear Distiller

Polar Bear Water Distillers:  Use with Models Model 26E1, 26M, 26E2, 26D, 42D with optional storage tank

Stainless Steel Filter Lid (2″d ) Offset hole in lid 



Many water distillers come with an activated coconut charcoal filter. Which requires that the charcoal be replaced every few months.   This crushed coconut shell has been steam activated to an extremely high temperature, effectively creating a special high quality porous grade of activated charcoal. This product is to be used along with any distiller to insure removal of certain gases or obnoxious odors, and improving taste.

Refillable filters: Use with Manually filled distillers, using optional storage tank for collecting distilled water as it is made.  Suitable  for Polar Bear Water Distiller.  (May work with Durastill Water Distillers, Purewater Distillers but you have to check cooling coil and tank inlet locations and verify heigh allowance.)



We recommend that you change the activated coconut charcoal every 1 to 3 months or approximately 100 gallons of distilled water made.
1) Empty old charcoal from stainless steel canister.
2) Rinse canister thoroughly.
3) Fill canister 2/3 full of new charcoal.
4) Rinse with boiling hot distilled water to rinse the dust from the charcoal. Do this several times until the water through the filter runs clear.
5) Replace filter on distiller. with 100% pure granulated activated coconut shell charcoal

Note: Do Not Substitute any other type of charcoal for use in a water distiller. Never use the aquarium type of charcoal

Distiller Filters & Parts | Cooler Stores Edmonton | Distiller Stores Edmonton | Reverse Osmosis Water Filters Edmonton | Water Pumps Edmonton | Water Pumps for Sale Edmonton


There are no reviews yet.

Be the first to review “Filter Lid SS for Polar Bear Distiller”