Sold Out New

Float Washer 2.75″ – Polar Bear Water Distillers #100062

$11.95

Replacement Stainless Steel Float Washer, tightens and holds float seals in place. for Polar Bear Water Distillers.

Float Washer 2.75″ – Polar Bear Water Distillers #100062

Replacement Stainless Steel Float Washer, tightens and holds float seals in place. For Polar Bear Water Distillers.  May fit other brands of distillers.

This is a universal part replacement for all Polar Bear distillers. 26E1, 26M, 26-E2, 26-14, 26CT, 26D4, 26C8, 26D8, 42D5, 42D10, 42D25, 100L, 200L.  May fit older Polar Bear Distillers 6A, 6B, 6C. 12D – Aquastill M6D, and possibly other brands of distillers. 

Parts Referred To:

  • Part#             Qty        Description
  • 100062           1            Boiler Tank Float Washer Stainless steel 2.75″
  • 100067               1            Boiler Tank Float Gasket, NTear (Black)
  • 100066               1            Boiler Tank Float Gasket, Silicone
  • 15001                  1            Washer, Flat, SS, 5/32×3/8”
  • 100060               1            Float, Brass Contact
  • 15003                  2            Washer, Flat, SS, 5/16” x 11/16”
  • 15001                  2             Hex Nut, SS, 1/4” -20

Tools Required

  • Red Robertson Screwdriver
  • #2 Phillips Screwdriver
  • Adjustable (Crescent) Wrench
  • 7/16” Deep-Well Socket

Assembly Instructions

  1. Ensure that all of the parts are available
  2. Turn main power switch on distiller off and unplug cord from wall plug.
  3. Drain the boiler tank. CAUTOION: DRAIN VALVE MAY BE VERY HOT. Wait at least 1 hour for distiller to cool.
  4. Remove the distiller covers. On a 26-CT, 26D-8, 26C-8 or 26-14, this will require disconnecting the feed line and removing the feed line fitting on the back of the distiller. ENSURE SADDLE VALVE IS CLOSED BEFORE DISCONNECTING FEED LINE.
  5. Remove the nuts attaching the lexan switch plate to the copper studs. Remove the switch plate from the studs so that it hangs by it’s wires.
  6. Remove the nuts attaching the float washer to the boiler tank. Remove the brass contact and it’s washer. Remove the large float washer and both gaskets, being careful not to bend the float rod.
  7. Place the new silicon (grey/tan) gasket over the studs. Place the gasket over the threads on the screw welded to the float rod, but do not stretch the gasket over the screw head. Ensure the gasket is flush against the boiler wall. Do the same with the no-tear gasket. (black side out, grey side against the silicon )
  8. Attach the large 2.75″ float washer to the studs. Attach the brass contact with it’s washer to the float rod.
  9. Attach the lexan switch plate to the studs, ensuring that the wires do not interfere with the float rod or any other components.
  10. Reattach covers. Ensure impurities drain valve is closed. Reattach water feed line if it was removed and open saddle valve.

 


 Water Distiller Parts | Health Food Stores Edmonton | Natural Food Stores Edmonton | Supplement Stores Edmonton | Health Supplement Stores Edmonton | Best Supplement Stores Edmonton | Aromatherapy Stores Edmonton | Vitamin Stores Edmonton | Herbal Stores Edmonton | Natural Body Care Edmonton | Cooler Stores Edmonton | Distiller Stores Edmonton | Reverse Osmosis Water Filters Edmonton | Water Pumps Edmonton | Water Pumps for Sale Edmonton

Reviews

There are no reviews yet.

Be the first to review “Float Washer 2.75″ – Polar Bear Water Distillers #100062”