Precision Water Distiller – Lid Gasket Replacement
Item # 500111 Boiling Tank Lid Gasket, Silicon
Universal Part fits Precision Water Distillers Models: 8-M, 5-3, 8-5, 8-8, 12-12, 12-20
Size (4 1/2″ diam hole & 6″ square outside)
Please read complete instructions before replacing components.
Tools Required: Red Robertson Screwdriver, #1 Phillips Screwdriver
1.Turn main power switch on distiller off and unplug cord from wall plug.
2.Drain the boiler tank. CAUTION: DRAIN VALVE MAY BE VERY HOT. Wait at least 1 hour for distiller to cool.
3.Remove distiller covers by removing the screws.
4.Remove boiling tank lid.
5.Remove the old lid gasket and replace it with the new gasket.
6.Replace distiller covers and boiling tank lid. Replace feed line connection fitting a feed lid (if it was removed).
7.Open saddle valve.
The distiller should now operate properly. If it does not, we suggest you take your distiller to an authorized service representative, or phone 1-780-477-1328 for assistance.
Distiller Parts | Health Food Stores Edmonton | Natural Food Stores Edmonton | Supplement Stores Edmonton | Health Supplement Stores Edmonton | Best Supplement Stores Edmonton | Aromatherapy Stores Edmonton | Vitamin Stores Edmonton | Herbal Stores Edmonton | Natural Body Care Edmonton | Cooler Stores Edmonton | Distiller Stores Edmonton | Reverse Osmosis Water Filters Edmonton | Water Pumps Edmonton | Water Pumps for Sale Edmonton
There are no reviews yet.